company news about Image measuring instrument requirements for working environment

Image measuring instrument requirements for working environment

We all know that the daily protection and maintenance of the image measuring instrument is very important, but when the instrument is not working or working, there are strict requirements for the surrounding environment. This environment will have a slow shadow box for the instrument, and the life of the instrument will be slowly reduced if you do not pay attention to it. Therefore, users should pay attention to these problems, because the precision of the instrument will also be affected by the environment. The general instrument should be placed in a clean environment, in addition to the following requirements:

1. Dust-free environment

The image measuring instrument is a very precise instrument, so it cannot be contaminated with dust. Once the instrument guide rail, lens, etc. are stained with dust and debris, it will have a serious impact on the accuracy and imaging. Therefore, the instrument should be cleaned regularly to achieve a dust-free environment as far as possible. Personnel should pay attention to entering and leaving, ask to change shoes or wear shoe covers. And reduce the flow of people in and out.

2. Reduce oil pollution

Image measuring instrument is a very precise instrument, so its guide rail, lens, grating ruler and flat glass can not be contaminated with oil, otherwise it will affect the normal use of the instrument. Usually be careful not to use dirty hands directly touch the instrument, it is best to be able to wear cotton gloves.

3. Influence of light

The measuring instrument can not be directly used with direct sunlight, nor can it be placed in a place where the sunlight is very strong, otherwise it will affect the accuracy of the instrument, and the long-term direct temperature is too high will damage the instrument.

4. Temperature control

The ambient temperature of the measuring instrument is placed at 18 degrees Celsius - 24 degrees Celsius, which can not exceed this range, otherwise the accuracy will be damaged.

5. Humidity control

Humidity also has an impact on the accuracy of the instrument, and the ambient humidity is too high will cause the instrument to rust. Therefore, the general ambient humidity should be controlled between 45% and 75%.

6. Pay attention to shock absorption

If the instrument is in a vibration environment for a long time, its parts will be damaged and the accuracy will be reduced. Shock absorption is very necessary. When the frequency is less than 10Hz, the amplitude should be less than 2um. When the frequency is 10Hz-- 50Hz, the acceleration is less than 0.4Gal.. If these vibration environments cannot be controlled, then vibration dampers should be installed to reduce vibration.

No matter how good the brand, how good the quality, you need to pay attention to use and maintenance. The impact of environmental control on the measuring instrument is imperceptible, I hope users can notice the above points, protect the instrument to reduce damage. Zhaofeng Precision Instrument company has a strong after-sales team, and the instruments sold are also presented with a long warranty period, although these can reduce the "worries" of the enterprise, but if the enterprise can pay attention to daily maintenance and environmental control, it is a kind of cost savings. Because if the instrument fails, it needs to be repaired, which will cost a lot of money, so it is necessary to protect the instrument.